View source for Supermicro IPMI

= ipmitool =

Cold reset:</br>
<code>ipmitool bmc reset cold</code></br>

== IPMI Settings ==
Show current configuration:<br>
<code>ipmitool lan print 1</code><br>

Set IPMI address:\\
<code>ipmitool lan set 1 ipsrc static</code><br>
<code>ipmitool lan set 1 ipaddr <IP></code><br>
<code>ipmitool lan set 1 netmask <netmask></code><br>
<code>ipmitool lan set 1 defgw ipaddr <gwipaddr></code><br>
<code>ipmitool lan set 1 vlan id <off|vlanid></code><br>
</br>
<code>ipmitool raw 0x30 0x70 0x0c 0</code> To get LAN mode</br>
<code>ipmitool raw 0x30 0x70 0x0c 1 0x00</code> To set LAN mode onboard/shared</br>
<code>ipmitool raw 0x30 0x70 0x0c 1 0x01</code> To set LAN mode dedicated</br>
<code>ipmitool raw 0x30 0x70 0x0c 1 0x02</code> To set LAN mode failover</br>

== Reset IPMI Password ==

<code>ipmitool user list</code><br>
<code>ipmitool user set password <ID> <NEWPASSWD></code>

== Fan Control==
<code>ipmitool raw 0x30 0x70 0x66 0x01 0x00 0x09</code> Set Fans 0x00 to 9%.</br>
<code>ipmitool raw 0x30 0x70 0x66 0x01 0x01 0x09</code> Set Fans 0x01 to 9%.</br>
</br>
Fan Setting in BMC must be set to Full.</br>

== System Event Logs (SEL) ==
<code>ipmitool sel list</code> show events</br>
<code>ipmitool sel elist</code> show events with extended details</br>
<code>ipmitool sel info</code> show info</br>

<code>ipmitool sel time get</code> show current BMC time</br>
<code>ipmitool sel elist last 10</code> watch in real time</br>

<code>ipmitool sensor</code> show all sensor readings</br>